Tennis-betting

Notes and use methods of bronze powder

More coarse the bronze powder is, the stronger the sense of metal will be. And it becomes more flashing and brightness. If it is finer, sense of metal reduced, the color is gentler and hiding function is better. Copper powder under gentle stirring, scores of times to the copper powder in the solvent of 1:1 or 2:1. Under low shear stirring for about 15 minutes to a paste. Adding the required tone gold oil, stir to blend evenly. Solvent adjusted to the desired viscosity. To avoid curling and breaking the flaky copper powder particles in the dispersion process and reduce optical effects, the best choice of blade stirrer or disc scattered, medium-speed stir. At the same time should avoid the use of nitrocellulose and epoxy resin. Two will be Si chemical reaction to generate the jelly; such as the use of these two resin, it should be as much as possible within a short time. Should be used wherever possible the low acid value of resin, the resin by the acid value as low as possible. Aromatic hydrocarbons and esters help to make the metal powder particles completely wetting to achieve fully dispersed. It should avoid the use of alcohol and ketone solvents and acidification incomplete lipid solvent. Be sure to use high purity resin and solvent (low water content), containing a small amount of water recommended using the molecular sieve to remove the moisture before the copper powder pigments. Copper powder in the milling process will be added fatty acids, to reduce friction and protect the copper from the oxide, copper powder surface of both fatty acid protective layers. High temperature, water, sweat and alkaline media are very easy to damage the protective layer of copper powder surface, thereby enabling the slow oxidation, gradually lose their metallic luster. Caused by copper powder gloss because the powder particle size distribution too broad, too large proportion of fine particulates (<3¼m), copper powder in the low and aligned bonding compound floating. Equal to the composition of bronze powder and import of copper powder has the same hue and saturation. The uneven distribution of powder particle size is in thick scales, the surface cover rate is smaller with low gloss. The determination of the bronze powder’s correspondence between wettability and floating deepens the understanding of mechanism of copper powder’s floating. And it proposes a new method for improvements of bronze powder’s floating performance. It provides a new approach for surface treatment of bronze powder (FCu 663). After the use of FSA on the surface modification of bronze powder, bronze powder’s floating and printed brightness are greatly improved. It shortens the gap with imported powders. In the polishing process of bronze powder, bronze powder tablets were flattened polished and has the fragmentation phenomenon. It reduces the performance of surface cover rate’s changes according to the polishing time. Source:http://www.mhcmp.com 

Shall not be reproduced without permission:Tennis-betting » Notes and use methods of bronze powder